60MM X 3MM Shims WEAR BUTTON 23/8"

WEAR BUTTON 23/8"

You need 5/8" bolts for these side cutters

bucket tooth

This bolt on End Bit has an industry standard part number of 4T6229MT and has 3 bolt holes

60MM X 3MM Shims WEAR BUTTON 23/8"This steel bucket pin shim is for a pin with an outer diameter of 60 mm. It is 3 mm thick with an OD of 120 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller